AMBER Glass SEMI-PERMANENT nail polish - 08

AMBER Glass SEMI-PERMANENT nail polish - 08

Nailfor
08-AMBGL
Out-of-Stock
€8.99

Amber Glass Fluo glass effect enamel.
Amber Glass nail polish is a semi-permanent nail polish with a particular glass effect, available in different colours.
After application, seal with the Top Coat with anti-UV filter.

Innovative line in the field of nail gels, self-levelling, very simple to apply and remove.

The color may vary depending on the device and/or the display on which it is displayed.

Content: 10ML

Made in USA - For Professional Use Only


 

Amber Glass enamel with glass effect.
Amber Glass nail polish is a semi-permanent nail polish with a particular glass effect, available in different colours.

Innovative line in the field of nail gels, very simple to apply and remove.

Upon application they are self-levelling and long-lasting.

HOW TO USE:
1. Shake the bottle before use.

2. Disinfect the client's hand with Fresh Solution Spray

3. Push the cuticles with the Cuticle Pusher

4. Clean the cuticle area well, eliminating dead cells.

5. Matt the surface of the nail plate with the abrasive brick.

6. Carefully dust off all the dust produced with the appropriate brush.

7. Apply Nail Prep and let air dry for approximately 30 seconds.

8. Apply Ultrabond Primer or Regular Primer, let air dry for about 30 seconds and leave the shiny, tacky layer it produces after drying.

9. Apply a gel base of your choice between: GEL BASE&TOP 2in1, GEL BASE BONDER, GEL BASE HD.

10. Apply two thin layers of AMBER ENAMEL, taking care not to touch the cuticles. Cure at each step in a 36 WATT UV lamp for 2 minutes or 1 minute in a 36 Watt LED lamp (leave the sticky layer!). If using a lower wattage lamp, extend the curing time by 1-2 minutes.

11. Apply Gel Polish Base&Top to seal the job, being careful not to touch the cuticles. Cure in a 36 WATT UV lamp for 4 minutes or 2 minutes in an LED lamp (36 Watt).

12. Degrease with the UV Gel Cleanser solution to finish the job.

HOW TO REMOVE:
1. Mattify the shiny surface of the nail polish with a 100/180 file, being careful not to damage the natural nail.

2. Dip your fingers in the Soak-Off Remover or apply a pad soaked in solvent to each nail, wrap with aluminum foil and leave on for 10-20 minutes depending on the system used.

3. Remove softened nail polish with a Pusher.

The color may vary depending on the device and/or the display on which it is displayed.

Content: 10ML

Made in USA - For Professional Use Only

Product added to wishlist

To enhance your experience on our online shop, we use cookies. Please refer to our privacy policy for details. Accept the use of cookies by clicking here to continue your navigation. Thank you