• -40%
Merlot 11 - SEMI-PERMANENT gel base Rubber semi...

Merlot 11 - SEMI-PERMANENT gel base Rubber semi -lift

Nailfor
011-BR
On stock
€6.59 €10.99 -40%

Ideal Christmas decals to easily create apparently very complex nail art.

You can choose one or more formats to combine them together for a varied effect.

 

Characteristics:
- Medium and elastic viscosity, ideal for weak, very flexible or damaged nails .
- The slightly translucent appearance allows it to be applied with a very natural result.
- Its composition adheres perfectly to the natural nail without creating lifts.
- Correction of the nail edge, to better define the free margin which often appears jagged and asymmetrical.
- Define the irregular surface with any small depressions or in the presence of scratched nails, creating a micro-camber.
- Self-leveling formulation allows you to apply the product easily and uniformly.

 

Application Mode:
1. Remove cuticles and matt the natural nail with a buffer file
2. Apply the Nail Prep and Primer UV Gel & Acrylic preparatory liquids
3. Apply the Rubber Base Gel evenly, from top to bottom with fluid movements and cure.
4. Seal as desired for a natural effect, or apply your favorite semi-permanent nail polish in two thin applications, polymerizing after each step and finally seal with a Nailfor Top Coat.
5. If you have used Top Coat with dispersion, degrease with Cleanser .

 

Micro lengthening to repair chipped nail:
- Do not file the entire length of the natural nail to position the nail form well.
- Apply the product in the chipped corner and then on the natural nail and cure in the lamp. Repeat the application process to improve the appearance of the nail.
- Remove the nail form, file away excess product and redefine the shape of the nail.
- Remove the dust well and proceed with the application of semi-permanent nail polish and sealing.

 

Removing semi-permanent gel:
1. Remove the sealing layer with a file
2. Take a Foil Nail Wrap soaked in Remover and wrap well on the nail
3. Wait about 10 minutes
4. Remove the semi-permanent gel with a Pusher

To speed up removal, use a medium low abrasion file or bur tip.

 

Curing times:
UV 36W: 120 seconds
Led/UV 48W: 30/60 seconds

Polymerization times may be prolonged depending on the lamp used and the quantity of product applied.

15 ml format
Made in the USA
Product for professional use

Product added to wishlist

To enhance your experience on our online shop, we use cookies. Please refer to our privacy policy for details. Accept the use of cookies by clicking here to continue your navigation. Thank you